Led Slim panel Installation


What is a LED Slim Panel?
The LED panel is one of the leading lights currently available, as it allows both to illuminate and decorate cheaply the interior of his house. Indeed, consuming only a small amount of energy when compared to its like. It owes its advantages to the materials of which it is composed which are neither more nor less than an LED strip installed in an aluminum frame and closed by a Plexiglas diffuse. This is the reason why it is very light despite its size and can easily be suspended from the ceiling. It therefore does not risk damaging the plasterboard ceiling on which it is placed nor the support that holds it when it is placed in suspension.


















Various method of installation of led Slim Panel:

The different dimensions of LED panel
The LED panel is available in different sizes including 300 x 300 cm, 600 x 600 cm and 1200 x 300 cm. The choice however depends on the place where they will be installed and the expected rendering in their use. In any case, the 600*600 led panel is the most used because of its standard size and its ability to adapt to all existing decorating styles. Like the other two dimensions, it is also easy to install. Simply plug the transformer into the power supply to get a light effect like a skylight. In addition to the 3-year warranty it has, because it has a very long life, its price is also one of the lowest on the market.
The recessed installation:
So you can install recessed LED panel. Simply remove the old light fixture and slide the LED panel instead. However, care must be taken to insert a security cable, especially for public places. You must put back the cable or chain that was hooked to the old luminary.
It is also possible to embed it in a false ceiling, resting on the frame, being careful to cut cleanly and clearly cut intended for this purpose. If you want to install it on the walls, do it with rear mounting brackets with a light to fit the screw head?

The projecting installation
The LED panel is also installed projecting when the ceiling on which it will be put is concrete for example. You can do the same if the cut on which the pose is rigid or difficult to achieve. It is the same for a wall pose. In this case, you must install the LED ceiling light in another aluminum frame that you attach to the ceiling with 4 fixing points located on its back. Then you simply integrate the LED panel in this part of which is disengaged, to slide the ceiling and so as to obtain a compact and rigid. Its total thickness then reaches about 6 cm since that of the frame is 5 cm with the same width and length as that of the slab concerned. Normally, this accessory or kit is supplied with its hardware, and the delivered frame disassembled to be assembled on the corners by the screws provided. Once assembled, check that their angles are 90 ° to avoid misalignment of the frame with the panel.

Suspended installation
The LED panel can also be installed in suspension or suspended, because a kit allowing to fix it in this version also exists. You can also help you with a set of steel cables with automatic adjustment, which allows the ceiling to not go down once the slab installed. Available with hardware, this suspension kit allows you to fix your panel in just 5 to 10 minutes. In this case, simply screw the spacers on the panel, and then do the same on your ceiling. Then screw the ends of the cables and you're done.
When designing or renovating your interior decoration, especially if you are a fan of LED lighting, you may be interested in LED light tiles. In addition to their aesthetic appearance and their many advantages of use, they can also be laid in various ways. Zoom on the different possibilities of installation of LED Panel.
You can check more about LED Lights

Comments

Post a Comment

Popular posts from this blog

Led Spot Light

Image
LED Spot Light The installation of ceiling spotlights in a room requires the use of suitable supports. This is particularly the case of the  support of spot light , which allows to have supports orient able very practical, within the framework of the daily life. What to have a pleasant comfort at the lighting level. Where to put spots Lights?  Such spots are install able in a large part of the house. You can use them in your living  rooms : living room, living room, dining room, or kitchen.  The Led Spot Light  can also find its place on the ceiling of a corridor, to illuminate the entire length. A  Spot Led Light is also used for lighting rooms, but also in your bathroom and your toilet.  Overall, by following the installation advice (location, safety standards, etc.), we can put this type of support everywhere in the house, and it is extremely convenient.  Also note that this type of spot can ...
Read more

Dim able Led Light

Image
Dimmable LED bulb   The word dim able is an English term derived from "dimmer" which means in French "variateur". A dimmable LED bulb is therefore a bulb that is compatible with a dimmer. The latter makes it possible to modulate the power of the light according to the context and recalls the well-known principle of the halogen lamp. Characteristics of an LED bulb The name LED is an abbreviation for "Light Emitting Diode", which stands for "light-emitting diode lamp". Basically, these lamps were used for signaling or as watch indicators, thanks to their very long life. It was only in 2014, after the Nobel Prize in Physics was awarded to three Japanese researchers, that they were democratized on the bulb market. The latter had succeeded in highlighting a possible increase in light output on a blue light bulb. The luminous efficiency of an LED bulb, measured in lumen per watt, is much more important than an incandescent bulb, a...
Read more

LED For Gardnening

Image
LED For Gardening The  LED garlands  decorative are usually composed of a protection floor for charging batteries, and a more or less long filament equipped with many LED’s.   Its role is purely decorative and cannot be considered as a lighting in its own right.  Low power, it will have the advantage of creating a soft and warm atmosphere by installing them in any object compulsorily transparent, that one uses daily or on the contrary, totally unusual.  Indeed, the purpose of the  micro LED garlands is  to use the models of bases, to equip bottles, vases, glasses, any transparent decorative element, which at first sight, had little interest in your eyes, but which, assembled, will give to your interior decoration or your party tables like weddings, birthdays, end-of-year celebrations, a lot of cachet and originality. They are usually equipped with one or two AA batteries (not included in the packagi...
Read more